South African Class H1 4-8-2T

This article is about one of several different Central South African Railways locomotive types to be designated "Class E". For other CSAR Class E locomotives, see Central South African Railways Class E locomotives.
CSAR Class E 4-8-2T
South African Class H1 4-8-2T

CSAR Modified Class E no. 245,
SAR Class H1 no. 225, c. 1912
Type and origin
Power type Steam
Designer Natal Government Railways
(G.W. Reid)
Builder Dübs and Company
Neilson, Reid and Company
Central South African Railways
Serial number Dübs 4088, 4099, 4100
Neilson, Reid 6196, 6206, 6213
Model Converted Reid Tenwheeler
Build date c. 1903
Total produced 6
Specifications
Configuration 4-8-2T (Mountain)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 25 34 in (654 mm)
Coupled dia. 45 in (1,143 mm)
Trailing dia. 25 34 in (654 mm)
Wheelbase:
  Engine
30 ft 6 in (9,296 mm)
  Leading 5 ft 4 in (1,626 mm)
  Coupled 12 ft 6 in (3,810 mm)
Length:
  Over couplers 37 ft 6 in (11,430 mm)
Height 12 ft 6 in (3,810 mm)
Axle load 13 LT (13,210 kg)
  Leading 10 LT 4 cwt 2 qtr (10,390 kg)
  Coupled 13 LT (13,210 kg)
  Trailing 6 LT (6,096 kg)
Adhesive weight 52 LT (52,830 kg)
Loco weight 116,368 lb (52,780 kg) empty
68 LT (69,090 kg)
Fuel type Coal
Fuel capacity 4 LT (4.1 t)
Water cap 1,880 imp gal (8,550 l)
Firebox type Round-top
  Firegrate area 21 sq ft (2.0 m2)
Boiler:
  Pitch 6 ft 10 in (2,083 mm)
  Diameter 4 ft 7 78 in (1,419 mm)
  Tube plates 10 ft 4 in (3,150 mm)
  Small tubes 287: 1 34 in (44 mm)
Boiler pressure 175 psi (1,207 kPa)
Safety valve Ramsbottom
Heating surface 1,494 sq ft (138.8 m2)
  Tubes 1,359 sq ft (126.3 m2)
  Firebox 135 sq ft (12.5 m2)
Cylinders Two
Cylinder size 19 in (483 mm) bore
27 in (686 mm) stroke
Valve gear Allan
Couplers Bell link-and-pin
Performance figures
Tractive effort 28,430 lbf (126.5 kN) @ 75%
Career
Operators Imperial Military Railways
Central South African Railways
South African Railways
Class CSAR Class E, SAR Class H1
Number in class 6
Numbers CSAR 222, 233, 235, 245, 252
SAR 222–226
Nicknames Converted Reid
Delivered c. 1903
First run c. 1903
Withdrawn 1966
The leading coupled axle had flangeless wheels

The South African Railways Class H1 4-8-2T of 1903 was a steam locomotive from the pre-Union era in Transvaal.

In 1902, towards the end of the Second Boer War, the Imperial Military Railways placed thirty-five 4-10-2T tank locomotives in service, built to the specifications of the Reid Tenwheeler of the Natal Government Railways. At the end of the war, these locomotives came onto the roster of the Central South African Railways and became its Class E. Six of these locomotives were then converted to 4-8-2T tank locomotives and, in 1912, after the establishment of the South African Railways, the five survivors of these six were classified as Class H1.[1][2][3][4][5]

Origin

The requirement for a tank locomotive which could haul at least one and a half times as much as a Dübs A 4-8-2T locomotive on the Natal Government Railways (NGR) mainline, resulted in the design of a 4-10-2T tank locomotive by G.W. Reid, the Locomotive Superintendent of the NGR at the end of the 19th century. On the NGR, the locomotive type became known as the Reid Tenwheeler, later designated the NGR Class C 4-10-2T.[1][2][5]

Manufacturers

G.W. Reid

In 1902, during the Second Boer War, the Imperial Military Railways (IMR) of the invading British forces experienced a shortage of locomotives, as a result of damage caused during hostilities and the demands which were placed on the Railways by the British Military.[1][2]

Lieutenant-Colonel E.P.C. Girouard KCMG DSO, Royal Engineers, the Commissioner of Railways for the Transvaal and Orange River Colony, therefore placed urgent orders for thirty-five locomotives of the NGR's Reid Tenwheeler type. To ensure rapid delivery, the order was split between Dübs and Company, who built engine numbers 220 to 234, and Neilson, Reid and Company, who built numbers 235 to 254.[1][2][6]

Service

Imperial Military Railways

Compared to the NGR versions, the IMR locomotives were more ornate. In true military tradition, the steam domes, chimney caps and boiler bands were of polished brass. A weatherboard was affixed to the coal bunker, to offer better protection to the crew when travelling bunker forward.[1]

The practice of polished brasswork was followed on all new IMR locomotives and was continued even after the war, when the IMR became the Central South African Railways (CSAR).[1]

Central South African Railways

At the end of the war, these Reid Tenwheeler locomotives became the Class E on the CSAR roster.[1]

In c. 1903, six of the Class E locomotives, CSAR numbers 222, 233-235, 245 and 252, were converted to 4-8-2T Mountain type locomotives, by removing the fifth pair of coupled wheels and blanking off the resulting opening in the frame. The same modification was also done by the NGR on some of its own Reid Tenwheelers, to make them more suitable for yard work.[2][5][7]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (Cape Government Railways, NGR and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912.[4][8]

In SAR service, the five survivors of these CSAR 4-8-2T tank locomotives were designated Class H1. The locomotives were used extensively for shunting work in several parts of the country. The Class H1 had a long service life and the last of the Class was only withdrawn from service in 1966.[1][5][7]

Works numbers

The builders, works numbers, rebuilding and renumbering of all thirty-five original 4-10-2T locomotives are listed in the table.[4][5][7]

References

  1. 1 2 3 4 5 6 7 8 Holland, D.F. (1971). Steam Locomotives of the South African Railways, Volume 1: 1859-1910 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 95, 123–124, 134–135. ISBN 978-0-7153-5382-0.
  2. 1 2 3 4 5 Espitalier, T.J.; Day, W.A.J. (1944). The Locomotive in South Africa - A Brief History of Railway Development. Chapter III - Natal Government Railways. (Continued). South African Railways and Harbours Magazine, June 1944. pp. 424-425.
  3. South African Railways and Harbours Locomotive Diagram Book, 2'0" & 3'6" Gauge Steam Locomotives, 15 August 1941, pp21 & 21A, as amended
  4. 1 2 3 Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 7, 11, 13, 22-23 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  5. 1 2 3 4 5 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 10–11, 32, 56. ISBN 0869772112.
  6. Neilson, Reid works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  7. 1 2 3 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. p. 136. ISBN 978-0-7153-5427-8.
  8. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
Wikimedia Commons has media related to South African Class H1 (4-8-2T).
This article is issued from Wikipedia - version of the 5/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.